International Journal of Emerging Research in Engineering, Science, and Management
Vol. 5, Issue 1, pp. 13-31, Jan-Mar 2026.
https://doi.org/10.58482/ijeresm.v5i1.2

Received: 08 Dec 2025 | Revised: 10 Feb 2026 | Accepted: 14 Feb 2026 | Published: 19 Feb 2026

This work is licensed under a Creative Commons Attribution 4.0 International License.

Full Text PDF

Development and Evaluation of Automotive Lubricating Oil from Jatropha curcas Oil

Isaac Nsor

Bennetta Koomson

Patrick Boakye

Department of Materials and Metallurgical Engineering, Faculty of Mechanical and Chemical Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana.

Abstract: A Jatropha curcas-based bio-lubricant was developed and evaluated for automotive applications through acid esterification, base-catalyzed transesterification, in-situ peracetic acid epoxidation, and multi-additive blending. The molecular transformations were confirmed by GC–MS and FTIR, and physical properties were assessed using ASTM/ISO methods. Performance was further evaluated through a 12,000 km in-service motorcycle engine test and XRF wear analysis. Transesterification decreased kinematic viscosity at 40 °C from 36.6 to 16.7 cSt, and subsequent epoxidation and additive incorporation increased the viscosity to 47.2 cSt (40 °C) and 15.2 cSt (100 °C), meeting ISO VG-46 requirements. The resultant composition (JOA) showed density (888 kg m⁻³), viscosity index (227), pour point (−20 °C), flash point (230 °C), free fatty acid content (0.1%), and acid value < 0.5 mg KOH g⁻¹. The predominant components of JOA were determined by GC–MS, and ester and epoxide functionalities were confirmed by FTIR. During operation, the viscosity index decreased to 192.9, while maintaining acceptable viscosity retention and thermal stability. XRF analysis indicated controlled wear, with metal concentrations remaining within reported OEM guideline ranges. These results demonstrate the feasibility of using Jatropha curcas oil as a sustainable base stock for automotive lubricants.

Keywords: Bio-lubricant, Jatropha curcas, Transesterification, Epoxidation, ISO VG-46, Physicochemical properties.

References: 

  1. J. R. Patel, K. V. Chauhan, S. Rawal, N. P. Patel, and D. Subhedar, “Advances and Challenges in Bio-Based Lubricants for Sustainable Tribological Applications: A Comprehensive Review of Trends, Additives, and Performance evaluation,” Lubricants, vol. 13, no. 10, p. 440, Oct. 2025, doi: 10.3390/lubricants13100440.
  2. I. Wilińska and S. Wilkanowicz, “Advancements in environmentally friendly lubricant technologies: towards sustainable performance and efficiency,” Energies, vol. 18, no. 15, p. 4006, Jul. 2025, doi: 10.3390/en18154006.
  3. D. C. M. Ribeiro, A. Ramalho, A. C. Serra, and J. Coelho, “Biolubricants based on Epoxidized Vegetable Oils: A review on chemical modifications, tribological properties, and sustainability,” Lubricants, vol. 13, no. 12, p. 510, Nov. 2025, doi: 10.3390/lubricants13120510.
  4. Y. Hao et al., “Bio-based Lubricants: Progress in Research,” BioResources, vol. 20, no. 3, pp. 8349-8373, Aug. 2025, doi: 10.15376/BIORES.20.3.HAO.
  5. P. S. Ranjit et al., “Comprehensive Comparative Study of the Durability Wear Assessment of a Diesel Engine Fuelled with Jatropha Seed Oil and Diesel Fuel and Its Troubleshooting and Scheduled Maintenance,” ACS Omega, vol. 9, no. 43, pp. 43331–43352, Oct. 2024, doi: 10.1021/acsomega.4c00204.
  6. R. Uppar, P. Dinesha, and S. Kumar, “Performance and emissions of diesel engine combustion lubricated with Jatropha bio-lubricant and MWCNT additive,” Scientific Reports, vol. 15, no. 1, p. 2532, Jan. 2025, doi: 10.1038/s41598-025-86025-8.
  7. M. Torbacke, Å. Kassman Rudolphi, and E. Kassfeldt, Lubricants: Introduction to Properties and Performance. Chichester, U.K.: Wiley, 2014.
  8. J. Salimon, N. Salih, and E. Yousif, “Biolubricants: Raw materials, chemical modifications and environmental benefits,” European Journal of Lipid Science and Technology, vol. 112, no. 5, pp. 519–530, Mar. 2010, doi: 10.1002/ejlt.200900205.
  9. P. B. Warren, “Sliding friction in the hydrodynamic lubrication regime for a power-law fluid,” Journal of Physics Condensed Matter, vol. 29, no. 6, p. 064005, Dec. 2016, doi: 10.1088/1361-648x/29/6/064005.
  10. M. Macha, D. Senajova, T. Giles, M. Calviani, S. Girard, and M. Ferrari, “Effects of radiation dose on lubricants: A review of experimental studies,” ACS Applied Materials & Interfaces, vol. 17, no. 10, pp. 14773–14800, Feb. 2025, doi: 10.1021/acsami.4c21220.
  11. T. Ouyang, X. Sun, X. Tuo, Y. Yang, Q. Deng, and S. Qin, “Anti-wear effects of modified graphene/nanodiamond hybrid additives in lubricating oils,” Wear, vol. 576–577, p. 206116, May 2025, doi: 10.1016/j.wear.2025.206116.
  12. G. E. Totten, Ed., ASM Handbook, Volume 18: Friction, Lubrication, and Wear Technology. Materials Park, OH, USA: ASM International, 2017.
  13. N. J. Fox and G. W. Stachowiak, “Vegetable oil-based lubricants—A review of oxidation,” Tribology International, vol. 40, no. 7, pp. 1035–1046, Jul. 2007, doi: 10.1016/j.triboint.2006.11.011.
  14. G. E. Totten, Ed., Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing, 21st ed., vol. 1. Norwell, MA, USA: ASTM International, 2003.
  15. S. Fischer, M. Berti, R. Wilckens, and A. Del Pozo, “Development of vegetative propagation for Actaea racemosa Nutt.,” Industrial Crops and Products, vol. 24, no. 3, pp. 244–252, Oct. 2006, doi: 10.1016/j.indcrop.2006.06.004.
  16. A.K.M. Aminul Islam et al., “Physicochemical properties of jatropha seed oil: discloses potential source of biodiesel production,” Pakistan Journal of Botany, vol. 57, no. 4, pp. 1349-1356, 2025, doi: 10.30848/PJB2025-4(20).
  17. S. Nogales-Delgado, J. M. Encinar, and J. F. González, “A Review on Biolubricants Based on Vegetable Oils through Transesterification and the Role of Catalysts: Current Status and Future Trends,” Catalysts, vol. 13, no. 9, p. 1299, Sep. 2023, doi: 10.3390/catal13091299.
  18. A. Kumar and S. Sharma, “An evaluation of multipurpose oil seed crop for industrial uses (Jatropha curcas L.): A review,” Industrial Crops and Products, vol. 28, no. 1, pp. 1–10, Mar. 2008, doi: 10.1016/j.indcrop.2008.01.001.
  19. A. K. M. A. Islam et al., “Genotype and age of industrial plant Jatropha curcas L. affect physico-chemical properties of seed oil,” Frontiers in Energy Research, vol. 10, Oct. 2022, doi: 10.3389/fenrg.2022.979217.
  20. A. S. Silitonga, H. H. Masjuki, T. M. I. Mahlia, H. C. Ong, A. E. Atabani, and W. T. Chong, “A global comparative review of biodiesel production from Jatropha curcasusing different homogeneous acid and alkaline catalysts: Study of physical and chemical properties,” Renewable and Sustainable Energy Reviews, vol. 24, pp. 514–533, Aug. 2013, doi: 10.1016/j.rser.2013.03.044.
  21. S. Thapa, N. Indrawan, and S. Kumar, “An overview on fuel properties and prospects of Jatropha biodiesel as fuel for engines,” Energy Procedia, vol. 142, pp. 775–782, Dec. 2017 (published 2018), doi: 10.1016/j.egypro.2017.12.118.
  22. S. K. Hoekman, A. Broch, C. Robbins, E. Ceniceros, and M. Natarajan, “Review of biodiesel composition, properties, and specifications,” Renewable and Sustainable Energy Reviews, vol. 16, no. 1, pp. 143–169, Oct. 2011, doi: 10.1016/j.rser.2011.07.143.
  23. L. A. Quinchia, M. A. Delgado, T. Reddyhoff, C. Gallegos, and H. A. Spikes, “Tribological studies of potential vegetable oil-based lubricants containing environmentally friendly viscosity modifiers,” Tribology International, vol. 69, pp. 110–117, Sep. 2013, doi: 10.1016/j.triboint.2013.08.016.
Download PDF

This article is part of Volume 5, Issue 1 (Jan–Mar 2026)

© 2026 The Author(s). Published by IJERESM. This work is licensed under the Creative Commons Attribution 4.0 International License.

Archiving: All articles are permanently archived in Zenodo IJERESM Community.